Features
- Operation from 1000°C to 2800°C in vacuum, inert gas or Hydrogen.
- Operation from partial pressures of 10-6 torr up to 1-3 psig positive pressures.
- Low initial cost and efficient design with small footprint.
- Inexpensive to operate.
- Clean, compact, vacuum tight construction.
- Low thermal mass offering rapid heating and cooling.
- Cold Wall Vacuum furnace design with stainless steel inner and outer jackets with baffled water cooling.
- PLC with Industrial Programmable Controller or PC system using Intellution™ FIX32 HMI software customized by C/VI for vacuum furnaces, with extensive data acquisition; and remote operation capabilities.
- Our G-10503A positive pressure Hydrogen gas system with FM approval.
- "Component setup" for full unobstructed access to chamber and vacuum pumps without cumbersome panels to remove.
Specifications
| STD MODEL* | HOT ZONE SIZE WxHxD in (mm) | |
|---|---|---|
| 6612 | 6 x 6 x 12 | (150 x 150 x 305) |
| 6624 | 6 x 6 x 24 | (150 x 150 x 610) |
| 6636 | 6 x 6 x 36 | (150 x 150 x 914) |
| 9912 | 9 x 9 x 12 | (230 x 230 x 305) |
| 9924 | 9 x 9 x 24 | (230 x 230 x 610) |
| 9936 | 9 x 9 x 36 | (230 x 230 x 914) |
| 121212 | 12 x 12 x 12 | (305 x 305 x 305) |
| 121224 | 12 x 12 x 24 | (305 x 305 x 610) |
| 121236 | 12 x 12 x 36 | (305 x 305 x 914) |
* Custom sizes available upon request.
Applications
- Annealing
- Brazing
- Casting
- Ceramic Firing
- Degassing
- Diffusion Bonding
- Heat Treating
- Homogenization
- Melting
- Sintering
Optional Features
- Furnaces are available with and without vacuum pumping system; inert gas kits; power supply; temperature control instrumentation; cabinet; forced gas circulation fan; Hydrogen burn-off tower with igniter and blow-off port, etc.
- Vacuum pumping systems typically include diffusion pumps with backing pump and multi-coolant trap/baffle and/or mechanical pumps using manual or semi-automatic valves. Vacuum gauges and sensors include Combination Ion Gauges and Vacuum Thermocouple Gauge Tubes.
- Full range temperature control is available with either simple manual control of power output, or programmable control using closed-loop PID's. Temperature input is via power transducer, thermocouple, or optical pyrometer.
- Power supply includes SCR controller, current limiter, stepdown transformer, circuit breaker, contactor, separate controls transformer, and ammeter/voltmeters for display.
- Control Cabinets include push buttons, indicator lights, and water safety interlocks, completely wired in an attractive floor-standing cabinet.
- Furnaces may be used within glove boxes or hot cells.
- Manual rotameter or Mass Flow Controllers for precise, repeatable gas flow.
- CE / VDE / TüV / CSA approvals and other non-U.S. standards for compliance.
Contact Us
800.962.8631
603.595.7233
