5 SERIES

Bell Jar

 

Work specimens are very quickly prepared and a very high degree of purity is maintained.

Request Quote

5 Series Bell Jar

Because of its simplicity, ease of access into the furnace, and small volume, the furnace is easily purged. Work specimens are, therefore, very quickly prepared and a very high degree of purity is maintained.

The Centorr/Vacuum Industries’ Model 5BJ Single Arc furnace consists of a water-cooled stainless steel Bell Jar hinged from a fixed base plate. Clamps are provided for operation at slightly positive pressure. The electrode (stinger) shaft penetrates down through the Bell Jar top. The hearth is water-cooled copper with interchangeable top surface.

Various configurations of cavities can be provided in the hearth top surface.

Light and window are provided for observation inside the Bell Jar. The stinger is sealed to the Bell Jar top by means of a ball joint and stainless steel bellows. Pressure compensation for "zero feel" is incorporated into the design of this seal.

Provision is made for attachment to a vacuum pump for evacuation prior to backfilling with inert gas. Also included are ports and gauges for inert gas.

Features

  • Ease of Operation
  • Extremely dependable and versatile
  • Low initial cost
  • Instant high temperature
  • Accepts variety of hearth configurations
  • Extremely pure melts
  • Provision for titanium getter

Specifications

A typical system consists of:
  • Basic Furnace
  • Evacuation Kit
  • Inert Gas Kit
  • Power Cables
  • Power Supply
  • Base Cabinet
REQUIREMENTS
Electrical: Up to 1000 Amps D.C. welding type power supply
Water: 4 GPM @ 50 PSI and 70°F (30.4 LPM @ d.5 Kgs/cm2)
Evacuation Pump: 2 CFM (56.6 LPM) vacuum pump
Inert Gas: 2-10 CFM (56.6-283.2 LPM)
OPTIONS
  • Partial Pressure Control
  • High Vacuum Diffusion Pumping System, 10-5 - 10 -6 Torr Vacuum
  • High Frequency Arc Starter
SPECIFICATIONS
Maximum Temp: Over 3500°C
Hearth: 9" (22.9 cm) O.D. Water-Cooled copper
Bell Jar: 9 1/2" (24.4 cm) diameter x 11 1/2" (29.2 cm) high Stainless Steel water-jacketed
Stinger Tip: 1/4" (6.4 mm) diameter Thoriated Tungsten Rod
Arc Starter: 1/4" (6.4 mm) diameter Thoriated Tungsten Rod
Power Cables: Two (2) 6' (1.8M) long water-cooled
Base Plate: 18.5" (47 cm) diameter Aluminum
Light: At Bell Jar top, 7.5 watts
Window: View port at Bell Jar Top

Applications

Applications
  • Powder Melting
  • Arc Casting
  • Metallic and Non-Metallic Buttons
  • Annealing
  • Compound Synthesis
  • Material Densification
Made in the USA

Centorr Vacuum Industries specializes in challenging custom-designed vacuum furnace and controlled atmosphere furnace solutions for a variety of difficult thermal processes. Learn More